SpeedyBee F405 WING APP ArduPilot INAV 2-6S самолет литак коптер бпла 1850 ₴
Пишите в ВАЙБЕР СИГНАЛ 0955883805 . Смотрите мои другие объявления.
SpeedyBee F405 WING APP ArduPilot INAV 2-6S
Specifications
Product Name
SpeedyBee F405 WING FC board
MCU
STM32F405,168MHz,1MB Flash
IMU(Gyro Accelerometer)
ICM-42688-P
Barometer
SPL006-001
OSD Chip
AT7456E
Blackbox
MicroSD Card Slot
UART
6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection))
I2C
1x Used for magnetometer, digital airspeed sensor
ADC
4x (VBAT, Current, RSSI, Analog AirSpeed)
PWM
12x (11+1“LED”pad)
ELRS/CRSF receiver
Supported,connected to UART1
SBUS
Built in inverter for SBUS input (UART2-RX)
LED
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB
RSSI
Supported,Named as RS .
Supported FC Firmware
INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING
Product Name
SpeedyBee F405 WING PDB board
Input voltage range
7~36V (2~6S LiPo)
Battery Voltage Sensor
Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor
90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
TVS Protective diode
Yes
FC BEC output
Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip
VTX BEC output
Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.
Servo BEC output
Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.
Product Name
SpeedyBee F405 WING Wireless board
Wireless Configuration (long press BOOT button for 6 seconds to switch modes)
BLE mode, connect to Speedybee APP
Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes)
4x WS2812 LED strip connectors, adjustable colors and flashing modes
4x WS2812 LED strip connectors, adjustable colors and flashing modes
On-board battery level indicator
4x RGB indicator LED for battery level display by number of lights